Brand Name

(+84-28) 3978 0757

Download Softwares

NoApp NameDescriptionDownloads
 1  PilePro

PilePro software

PilePro has been developed by MSE. Tran Quang Thien and MSE. Nguyen Hong An since 1998. Basic information of this software:

  • PilePro is an Institute-level scientific project in 2004, which was evaluated and accepted by the Institute of Transport Science & Technology on October 19, 2006;
  • PilePro has been granted a copyright registration certificate on July 8, 2010 by the Copyright Office, Vietnam;
  • PilePro is a computer software (Software) specialized in construction, used to analyze the working of pile foundation in elastic foundation according to Winkler model. The interaction between the pile - ground is specified according to the standard Pile foundation - Design standard TCVN 10304:2014;
  • The results of the analysis include:
    • Resistance (load-bearing capacity) of the pile according to the soil (according to many applicable standards);
    • Displacement of pile base, displacement of pile according to pile length;
    • 6 components of pile internal force according to pile length, including analysis of characteristics of longitudinal force and component of resistance due to pile-soil friction. At the same time, the program also analyzes the LRF ratio (mobilization factor = internal force / resistance) of the pile according to the material and soil;
    • Check the horizontal bearing capacity of the soil along the length of the pile;
    • Check the thinness of the pile;
    • Test the pile load capacity according to the material along the pile length, including simultaneous compression/tensioning, with consideration of moment amplification due to structural longitudinal bending;
    • Calculating pile foundation settlement and rating;
    • Check the bearing capacity of the soil layers below the pile tip;
    • Applicable standards: TCVN 10304:2014, AASHTO LRFD 1998 ÷ 2020, TCVN 11823:2017.

PilePro Version 24.1.3800.32

  • Allows execution in Windows 8.1 and 10 mode 64 bits (not used in Windows XP, Windows 7 and mode 32 bits);
  • Fix numerical and graphic errors

Lưu ý:

  • Only use when using Hardlock version 24 or higher, other versions of the Hardlock need to upgrade before you install and use;
  • Computers must be installed Net Framework 4.7.2 or higher. Download Net Framework 4.7.2 at here
 Download

 PilePro Version 24.1.3600.32

  • Allows execution in Windows 8.1 and 10 (not used in Windows XP, Windows 7);
  • Fix error in calculating single pile resistance of piles driven by the soil;
  • Update analysis of relative positions between piles in 3D model;
  • Update pile resistance library by material;
  • Fix numerical and graphic errors.

Notes:

  • Only use when using Hardlock version 24 or higher, other versions of the Hardlock need to upgrade before you install and use;
  • Computers must be installed Net Framework 4.7.2 or higher. Download Net Framework 4.7.2 at here
 Download

 PilePro Version 21.20.06.02

  • Allows execution in Windows 8.1 and 10 (not used in Windows XP, Windows 7);
  • Only used standard  TCVN 10304:2014, AASHTO LRFD 2017, TCVN 11823:2017;
  • Update pile resistance library by material;
  • Fix numerical and graphic errors.

Notes:

  • Only use when using Hardlock version 21 or higher, other versions of the Hardlock need to upgrade before you install and use
  • Computers must be installed Net Framework 4.8 or higher. Download Net Framework 4.8 at here
 Download 

 PilePro Version 21.17.12.1

  • Allows execution in Windows 8.1 and 10 (not used in Windows XP, Windows 7);
  • Only used standard  TCVN 10304:2014, AASHTO LRFD 2017, TCVN 11823:2017;
  • Correct the method for calculating the load bearing capacity of pile tips driven in loose soil according to AASHTO LRFD 2017. Specifically: In formula 10.7.3.8.6g-1 in AASHTO LRFD 2017 and formula 68 - Article 7.3.8.6.7 - section 10 - TCVN 11823:2017 in determining ql or qλ. In the N-mm unit system, the value ql = qλ is taken as 8 times the value (0.047880259•N160) for sand and 6 times the value (0.047880259•N160) for silty sand without clay;
  • Fix numerical and graphic errors.

Notes:

  • Only use when using Hardlock version 21 or higher, other versions of the Hardlock need to upgrade before you install and use
  • Computers must be installed Net Framework 4.6.1 or higher. Download Net Framework 4.6.1 at here
 Download

 PilePro Version 21.10.4.21

  • Allows execution in Windows 8.1 and 10 (not used in Windows XP, Windows 7);
  • Only used standard  TCVN 10304:2014, TCVN 11823:2017;
  • Supplementing and correcting the method of calculating the load bearing capacity of screw-dried piles according to TCVN 10304:2014;
  • Fix numerical and graphic errors, add and adjust pile foundation settlement calculation, determine db value of piles driven in cohesive soil and edit geological data entry from Excel file.

Notes:

  • Only use when using Hardlock version 21 or higher, other versions of the Hardlock need to upgrade before you install and use
  • Computers must be installed Net Framework 4.7.2 or higher. Download Net Framework 4.7.2 at here
 Download

 PilePro Version 20.15.9.20

  • Allows execution in Windows 8.1 and 10 (not used in Windows XP, Windows 7);
  • Only used standard  TCVN 10304:2014, TCVN 11823:2017;
  • Supplementing and correcting the method of calculating the load bearing capacity of screw-dried piles according to TCVN 10304:2014;
  • Correct numerical and graphic errors, add and adjust pile foundation settlement calculation, determine db value of piles driven in cohesive soil and edit geological data entry from Excel file.

Notes:

  • Only use when using Hardlock version 20 or higher, other versions of the Hardlock need to upgrade before you install and use
  • Computers must be installed Net Framework 4.7.2 or higher. Download Net Framework 4.7.2 at here
 Download

 PilePro Version 19.55.12.19

  • Allows execution in Windows 8.1 and 10 (not used in Windows XP, Windows 7);
  • Replace TCXD 205:1998 standard with TCVN 10304:2014, TCVN 11823:2017;
  • Supplementing the method of calculating the load-bearing capacity of screw-dried piles according to TCVN 10304:2014;
  • Fix numerical and graphic errors, add and adjust pile foundation settlement calculation

Notes:

  • Only use when using Hardlock version 21 or higher, other versions of the Hardlock need to upgrade before you install and use
  • Computers must be installed Net Framework 4.6.1 or higher. Download Net Framework 4.6.1 at here
 Download

Updated to: PilePro Version 9.5.5.17

  • Allows execution in Windows 7 (SP1), 8.1 and 10 (not used in Windows XP)
  • Import section from ZWCad 2015+ or AutoCAD R.2011
  • Support to input pile coordinate from ZWCad 2015+ or AutoCAD R.2011
  • Completely replace the standard TCXD 205: 1998 by standard  TCVN 10304: 2014
  • Additional method for calculating the load capacity of screw piles according to TCVN 10304: 2014
  • Some bug fixes, graphics

Notes:

  • Only use when using Hardlock version 9 or higher, other versions of the Hardlock need to upgrade before you install and use
  • Computers must be installed Net Framework 4.6.2 or higher. Download Net Framework 4.6.2 at here
  Download
2 RoadPro

RoadPro software

RoadPro was developed by Master Nguyen Hong An in 1998. Basic information of this software:

  • RoadPro is an Institute-level scientific project in 2007, which was evaluated and accepted by the Institute of Transport Science & Technology on October 24, 2008;
  • RoadPro has been granted a copyright registration certificate on July 8, 2010 by the Copyright Office, Vietnam;
  • RoadPro is computer software (Software) specialized in construction, used to analyze the working of the soil under the effect of loads under 3 limit states: strength, stability, deformation;
  • The program is capable of analyzing some popular foundation reinforcement solutions:  soil change (sand cushion, EPS lightweight block), geotextile, deep reinforcement (sand pile, sand well, permeable wick, cement - soil column), hard piles (reinforced concrete piles, wooden piles);
  • The results of the analysis include:
    • Analysis of 3 stress components (2 normal stress components and 1 linear component) at any position in the ground under the action of loads;
    • Check and display the plastic deformation area of the soil due to the applied loads;
    • Check the load capacity of the soil layers under the effect of loads;
    • Analysis of deep sliding stability by Fellenius method (classical fragmentation) with combined circular arc or flat - circular sliding surface;
    • Analysis of depth shear stability by Bishop method with circular arc or flat - circular sliding surfaces;
    • Settlement analysis: elastic settlement (immediately settlement), consolidation settlement and the second settlement, in which the software has analysis of settlement over time with many stages of embankment;
    • Applicable standards: TCVN 9355:2013, TCVN9403:2012, TCVN 9844:2013, TCVN 9906:2014, TCVN 11820:2021, TCVN 11823:2017, TCVN 12250:2018, TCCS 41:2022/TCDBVN
  Download

RoadPro Version 20.15.6.20

  • Allows execution in Windows 7, 8, 8.1 and 10 (not used in Windows XP);
  • Upgarde bug fix;
  • Allows import section from ZWCad or AutoCAD R.2011;
  • Fix error for RoadPro;
  • Some bug fixes, graphics.

Notes:

  • Only use when using Hardlock version 20 or higher, other versions of the Hardlock need to upgrade before you install and use
  • Computers must be installed Net Framework 4.7.2 or higher. Download Net Framework 4.7.2 at here

Updated to: RoadPro Version 9.5.5.17

  • Allows execution in Windows 7, 8, 8.1 and 10 (not used in Windows XP);
  • Upgarde bug fix;
  • Allows import section from ZWCad or AutoCAD R.2011;
  • Fix error for RoadPro;
  • Some bug fixes, graphics.

Notes:

  • Only use when using Hardlock version 9 or higher, other versions of the Hardlock need to upgrade before you install and use
  • Computers must be installed Net Framework 4.6.2 or higher. Download Net Framework 4.6.2 at here